wavelengths
 

Coatings for special applications

Special applications need special coating designs and / or techniques. LASEROPTIK can offer optimized solutions for the following topics:

 

 

Coatings by mother nature

Steep natural edge filter / partial reflector on
dorsal elytra of Chrysina lim­bata and Chrysina
aurigans 1

Frequently asked questions

Can you coat optics for high-power CW or multi-kilowatt lasers?

For high-power CW or multi-kilowatt lasers you need coatings with dense layers, low absorption and a good thermal conductivity. LASEROPTIK can offer such optics, using sputtered coatings like Ion Beam Sputtering (IBS) and Magnetron Sputtering (MS).

I have very special environmental conditions, like extreme temperature ranges, high humidity or use in special gases or fluids, what optics do I need?

To avoid degradation within hostile working conditions or due to the need to clean optics more often, you need optimized coatings with dense and stable layers, such as sputtered ones.

LASEROPTIK can offer coatings for every environmental condition.

Our Magnetron Sputtering coatings (MS) have already been successfully tested in customer projects as being resistant to various acids or extreme temperatures, from 2.7 K up to 1200 °C.

I need optics that are used on aircraft, even at high altitudes, or outside the Earth's atmosphere in satellites, can LASEROPTIK offer something here?

Yes, LASEROPTIK manufactures spaceborne and airborne optics, which require environmentally robust coatings.
In various projects for DLR, ESA and NASA or their industry partners, LASEROPTIK has developed coatings and optics for laser applications in space or airborne environments and proven their functionality and durability. Additionally, we test the resistance of specific coatings against gamma and neutron radiation for use in space.

https://www.laseroptik.com/en/coatings/coatings-for-special-applications/spaceborne/airborne-optics

I need a specific or high finesse, what can LASEROPTIK offer?

With the high accuracy of the IBS coating technique, LASEROPTIK manufactures coatings with well-defined transmission values for achieving specific finesse values which are required for optical frequency standards or Fabry-Perot interferometers. For example, cavity mirrors provided with a transmission of T = 7 ppm at 1550 nm generated a finesse of > 300,000 due to lowest absorption of the dielectric layer stack and lowest scattering by using super-polished substrates.

https://www.laseroptik.com/en/coatings/coatings-for-special-applications/extremely-low-loss-laser-optics

What are supermirrors?

Supermirrors are special Bragg mirrors with lowest losses (due to transmission, absorption and scattering). They typically achieve a reflection > 99.99%, depending mainly on the wavelength used.

LASEROPTIK can offer optics for extremely low loss applications, one of our supermirrors has been measured with R > 99.999% at 1064 nm / 0°. Find measured values for other wavelengths here:

https://www.laseroptik.com/en/coatings/coatings-for-special-applications/extremely-low-loss-laser-optics

What substrate quality do I need for low loss mirrors?

For low loss applications you must choose the correct coating technique (IBS) and extremely well-polished substrates.

Supermirrors with a reflectance above 99.99% can only be achieved by using super-polished substrates with a surface roughness RMS < 0.1 nm.

Why do I need special environmental conditions in the VUV/UV?

Especially in the ultraviolet spectral range, the lifetime can be drastically reduced by Laser-Induced Contamination (LIC). High-energy UV photons can trigger the photopolymerization of volatile organic compounds (e.g. from outgassing components like adhesives, plastics, or lubricants) directly on the optical surface. This creates a highly absorbing deposit that can cause catastrophic thermal damage well below the optic's nominal LIDT. For long lifetimes, a contamination-free or purge-gas environment is highly recommended.