Rectangular, square
| Tolerances | |
| Length / width: | |
| +0.0 / –0.1 mm (a < 105 mm) | |
| +0.0 / –0.2 mm (a ≥ 105 mm) | |
| Thickness t: | ±0.1 mm (t < 8 mm) |
| ±0.2 mm (t ≥ 8 mm) | |
| * +0.0 / –0.2 mm for S-00017 | |
| Parallel./Wedge: | < 5 min. of arc |
| Chamfer: | |
| 0.1–0.3 mm x 45° (a < 105 mm) | |
| 0.4–0.6 mm x 45° (a ≥ 105 mm) | |
| Clear aperture: | > 80% |
| Surface imperfection tolerance: acc. to DIN ISO 10110-7 |
|
Rectangular windows
| Length a mm | Width b mm | Thickness t mm | Flatness λ (633 nm) | Surface imp.tol. | UV-FS Article-No. | Stock |
|---|---|---|---|---|---|---|
| 25 | 15 | 1.5 | λ/4 | 5/3 x 0.040 | S-01019 | ✓ |
| 25 | 15 | 3 | λ/4 | 5/3 x 0.040 | S-01020 | ✓ |
| 30 | 20 | 3 | λ/4 | 5/3 x 0.040 | S-01021 | |
| 35 | 25 | 3 | λ/4 | 5/3 x 0.040 | S-01022 | ✓ |
| 45 | 30 | 5 | λ/10 | 5/3 x 0.040 | S-01023 | |
| 50 | 27 | 1.5 | 2λ | 5/3 x 0.040 | S-00016 | ✓ |
| 50 | 27 | 3 | λ/4 | 5/3 x 0.040 | S-00171 | ✓ |
| 60 | 35 | 2 | 2λ | 5/3 x 0.040 | S-00017 * | ✓ |
| 60 | 35 | 4 | λ/4 | 5/3 x 0.040 | S-00309 | ✓ |
| 60 | 35 | 5 | λ/10 | 5/3 x 0.040 | S-00867 | ✓ |
| 75 | 50 | 5 | λ/4 | 5/3 x 0.040 | S-00415 | ✓ |
| 105 | 75 | 8 | λ/4 | 5/3 x 0.063 | S-01024 | |
| 120 | 80 | 8 | λ/4 | 5/3 x 0.063 | S-00412 | ✓ |
| 150 | 100 | 8 | λ/4 | 5/3 x 0.063 | S-01025 |
✓ available from stock
| Tolerances | |
| Length / width: | +0.0/-0.1 mm |
| Thickness t: | ±0.1 mm |
| Parallelism/Wedge: | < 5 min. of arc |
| Chamfer: | 0.1–0.3 mm x 45° |
| Clear aperture: | > 80% |
| Surface imperfection tolerance: acc. to DIN ISO 10110-7 |
|
Square windows
| Length a mm | Width b mm | Thickness t mm | Flatness λ (633 nm) | Surface imp.tol. | UV-FS Article-No. | Stock |
|---|---|---|---|---|---|---|
| 10 | 10 | 2 | λ/10 | 5/3 x 0.025 | S-00798 | ✓ |
| 12.7 | 12.7 | 3 | λ/10 | 5/3 x 0.025 | S-00173 | ✓ |
| 20 | 20 | 6 | λ/10 | 5/3 x 0.025 | S-01035 | ✓ |
| 25.4 | 25.4 | 6.35 | λ/10 | 5/3 x 0.025 | S-00859 | ✓ |
| 50 | 50 | 5 | λ/4 | 5/3 x 0.040 | S-01036 |
✓ available from stock
